anaxblend (tooth shades)

Bond LC, 10ml

A light-curing, multi-purpose bonder that bonds: - composites and PMMA - composites to cured composites - composites to blasted, etched, silanated porcelain - Bis-acryls to PMMA Apply a thin layer to the restoration surface, light cure for...

Model LC, 10ml

This modeling liquid for anaxblend composites increases viscosity of the material during modelation and prevents material from sticking to modeling instruments. Also for use with anaxgum pink composites.

Metal Bonder, 5ml

Our metal bonder provides an excellent bond between resins and metals of all kinds.  Simply blast, etch and dry the metal frame. Then, apply a generous layer of Metal Bonder, allow to air dry up to 5 minutes, and immediately apply a thin layer of...

Zircon Bonder, 5ml

A great bonding agent between zirconia frameworks and composite or PMMA. Just apply a layer of Zircon Bond, air dry, and the frame is ready!

Cover Gel (air inhibitor)

This clear gel is applied to the entire composite surface for a final curing cycle to remove the inhibitation layer, ensuring a complete cure to the restoration's surface. An essential step prior to polishing and/or glazing. 

anaxdent Universal Dispensing Gun

Universal dispensing gun that converts to accept 1:1, 2:1, 4:1 and 10:1 cartridges. Easily adapted to fit anaxblend Big Block 20g composite syringes and the anaxdent 50g PMMA dispenser.

Otoflash Replacement Tray

Replacement trays for the Otoflash G171 curing light.  Two options are available: UV Transparent: Recommended for any anaxdent composite products UV Block: Recommended for resins that require the blocking of UV rays (no such resins known to anax...