Product Description
Cure all light-curing materials in a flash with the Otoflash curing unit from NK Optik.
This model of Otoflash has a hook-up for Nitrogen gas. (Click Here to download helpful info about sourcing nitrogen gas and leasing/buying a tank)
Why? Because when composite contacts oxygen, it cannot cure! Most curing units require application of an oxygen inhibiting gel and an additional curing cycle to cure the sticky outer layer. But with the Otoflash unit, you just hook your unit up to nitrogen gas and turn on the gas when you cure your final layer! The result is fully cured composite without the mess of cover gel to clean afterward.
It's also a time-saver, curing composite fully in less than 60 seconds!
DOWNLOAD THE OTOFLASH MANUAL HERE
Product Specs:
INCLUDES PRESSURE REGULATOR FOR NITROGEN TANK
Dimensions of Polymerization Chamber: approx. 120 x 120 x 50 mm
Number of light sources: 2 flashbulbs à 100 W
Rated Voltage: 100, 117, 230 volt AC, adjustable by switch
Rated Frequency: 50 / 60 Hz
Power Input: 250 W
Spectral Distribution: 280-700 nm, maximum between 400 and 500 nm
Average Flash Power: 200 W
Flash Frequency: 10 flashes per second
Digital Timer: Adjustable from 1 to 9,999 flashes
Lifespan of Flash Module: Approx. 250 Hours
Dimensions: 12" x 12" x 6"
Weight: approx. 17 lbs
